Le test Extreme Networks EW0-100 EW0-200 EW0-300 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Extreme Networks EW0-100 EW0-200 EW0-300 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Extreme Networks EW0-100 EW0-200 EW0-300.
Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Extreme Networks EW0-100 EW0-200 EW0-300. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.
Code d'Examen: EW0-100
Nom d'Examen: Extreme Networks (Extreme Networks Associate (ENA) )
Questions et réponses: 241 Q&As
Code d'Examen: EW0-200
Nom d'Examen: Extreme Networks (Extreme networks associate(ena))
Questions et réponses: 240 Q&As
Code d'Examen: EW0-300
Nom d'Examen: Extreme Networks (Extreme Networks Specialist....)
Questions et réponses: 158 Q&As
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Extreme Networks EW0-100 EW0-200 EW0-300. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Extreme Networks EW0-100 EW0-200 EW0-300, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Extreme Networks EW0-100 EW0-200 EW0-300. Vous aurez une space plus grande à se développer.
Avec la version plus nouvelle de Q&A Extreme Networks EW0-100 EW0-200 EW0-300, réussir le test Extreme Networks EW0-100 EW0-200 EW0-300 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.
Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Extreme Networks après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
EW0-300 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-300.html
NO.1 In PIM sparse mode the Bootstrap Router election is based on the highest IP
address.
A. True
B. False
Answer: B
Extreme Networks examen EW0-300 examen EW0-300 EW0-300 certification EW0-300
NO.2 An IP-only IS-IS router (or "IP-only" router) is defined to be
A. A router which uses IS-IS as the routing protocol for IP
B. Does not otherwise support OSI protocols
C. One of the IS-IS router types
D. All of the above
Answer: D
Extreme Networks EW0-300 certification EW0-300 EW0-300 EW0-300 examen
NO.3 ESRP-enabled switches can utilize either an IP address or an IPX net ID for their
protected VLANs.
A. TRUE
B. FALSE
Answer: A
Extreme Networks EW0-300 EW0-300 EW0-300 examen
NO.4 An LSP is a link state packet used by which routing protocol?
A. OSPF
B. RIP
C. BGP
D. None of these
Answer: D
Extreme Networks examen EW0-300 examen EW0-300 examen EW0-300 examen certification EW0-300
NO.5 Which CLI command configures DVMRP on all IP multicast interfaces.
A. config dvmrp add vlan all
B. config dvmrp add all
C. enable dvmrp
D. enable dvmrp vlan all
Answer: A
certification Extreme Networks EW0-300 EW0-300 EW0-300 examen EW0-300
NO.6 In SLB, Port Translation Mode is similar to Translation Mode,except that in Port
Translation Mode the physical Port where the node connects to must be configured
as a Fast Ethernet Half Duplex port.
A. True
B. False
Answer: B
certification Extreme Networks EW0-300 examen EW0-300
NO.7 Exhibit:
According to accompanying diagram and ACL configuration it is possible for Host
A (10.10.10.100) and Host C (30.30.30.100) to successfully communicate.
A. TRUE
B. FALSE
Answer: A
Extreme Networks certification EW0-300 EW0-300 EW0-300 certification EW0-300 EW0-300
NO.8 According
to accompanying diagram and ACL configuration it is possible to telnet
from host A to any of the switch IP addresses.
A. True
B. False
Answer: B
Extreme Networks EW0-300 EW0-300 EW0-300
NO.9 OSPF requires that all areas attach directly to the backbone area, and that all
attachments are made with a direct physical connection.
A. True
B. False
Answer: B
certification Extreme Networks certification EW0-300 certification EW0-300
NO.10 The maximum number of EAPS domains supported per switch and ring is?
A. 64
B. 32
C. 16
D. 8
Answer: A
Extreme Networks EW0-300 EW0-300 EW0-300 examen EW0-300
NO.11 Extreme Ware 7.0 can support which OSPF authentication on a per VLAN basis:
A. MD5
B. Simple-password
C. Encrypted simple-password
D. All of these
Answer: D
Extreme Networks EW0-300 EW0-300 EW0-300 certification EW0-300
NO.12 EAPS protection switching is similar to what can be achieved with the Spanning
Tree Protocol but one of the big advantages of EAPS is:
A. EAPS also supports star topologies
B. EAPS has a recovery time of less than a second in case of link failure.
C. An EAPS domain supports multiple root bridges, thus alternative path
D. EAPS eliminates the need for protocols like ESRP or VRRP that bring default
gateway redundancy.
Answer: B
certification Extreme Networks EW0-300 EW0-300
NO.13 An Ethernet Automatic Protection Switching (EAPS) domain relies on a control
VLAN.
The ports in that control VLAN ports must be tagged, and participating in the ring
only.
A. True
B. False
Answer: A
Extreme Networks EW0-300 EW0-300
NO.14 In Extreme Ware, which one of the following is an optional ESRP configuration
that allows you to connect active hosts directly to an ESRP master or standby
switch.
A. ESRP Groups
B. ESRP Domain
C. ESRP Host Attach
D. None of these
Answer: C
Extreme Networks examen EW0-300 examen certification EW0-300 EW0-300 examen EW0-300
NO.15 When limit-learning is configured on a port and the limit is reached the following
traffic still flows to the port.
A. Packets destined for the active Mac addresses
B. Broadcast traffic
C. EDP traffic
D. All of the above
Answer: D
Extreme Networks EW0-300 EW0-300 EW0-300 examen
NO.16 What is the RP-set?
A. It is the information of which RP are available for what Multicast groups.
It is send by the BSR towards all PIM routers
B. It is the information of which multicast groups are active
It is send by the RP towards all PIM routers
C. It is the information of which BSR are available for what Multicast groups.
It is send by RP towards all PIM routers
D. It is the information, stored by all RP, needed to find the BSR,
Answer: A
Extreme Networks EW0-300 EW0-300 EW0-300 examen
NO.17 In OSPF, the router type that is required to connect an area with another area is
the:
A. Designated Router
B. Back-up Designated Router
C. ASBR
D. ABR
Answer: D
Extreme Networks EW0-300 certification EW0-300 EW0-300 certification EW0-300
NO.18 The majority of Extreme Networks switches have a dedicated out of band
management port and VLAN. The 10/100BASE-TX Ethernet management port
allows you to communicate directly to the CPU of the switch. If you want the switch
to forward traffic from the mgmt VLAN to other VLANS you just have to enable
ipforwarding on all VLANS including the management VLAN.
A. TRUE
B. FALSE
Answer: B
certification Extreme Networks EW0-300 examen EW0-300 examen certification EW0-300
NO.19 Extreme Networks IS? Chipset switches allows you to run simultaneously the
Radius and Tacacs+features.
A. True
B. False
Answer: B
Extreme Networks examen EW0-300 examen certification EW0-300 EW0-300 EW0-300
NO.20 Extreme ware 7.0 supports both level1 and level 2 IS-IS routers.
A. TRUE
B. FALSE
Answer: A
Extreme Networks examen EW0-300 EW0-300 EW0-300
NO.21 On a RADIUS server you can distinguish between switch access and Netlogin
authentication. Extreme provides a vendor specific attribute
Extreme:Extreme-Netlogin-only =disabled/enabled.
User authentication for both Netlogin and switch access is allowed when the value is
disabled.
When the value enabled user authentication is restricted to Netlogin only.
A. True
B. False
Answer: A
certification Extreme Networks EW0-300 examen EW0-300 examen EW0-300 EW0-300
NO.22 The following CLI command is valid to advertise SLB virtual servers in OSPF ith a
cost of 10.
Enable ospf export vip cost 10
A. True
B. False
Answer: A
Extreme Networks examen certification EW0-300 certification EW0-300 EW0-300 EW0-300 EW0-300
NO.23 How many bits in the IP TOS field does a Summit 48i examine?
A. 4
B. 6
C. 8
D. 16
Answer: B
certification Extreme Networks EW0-300 examen EW0-300 EW0-300 examen
NO.24 The following modes of operation are supported with the Network login feature.
(choose all that apply)
A. Secure mode
B. Campus mode
C. Quick Mode
D. ISP mode
Answer: A,B,C,D
certification Extreme Networks EW0-300 certification EW0-300 EW0-300 examen
NO.25 The integrated IS-IS protocol allows for mixing of IP-only,OSI-only, and dual (IP
and OSI) routers.
A. True
B. False
Answer: A
Extreme Networks certification EW0-300 EW0-300 examen
NO.26 What is the CLI command you would use to configure a VLAN to be protected by
ESRP?
A. enable esrp vlan <vlan>
B. enable esrp vlan <vlan> detail
C. config esrp vlan <vlan>
D. config esrp vlan <vlan> detail
Answer: A
Extreme Networks EW0-300 certification EW0-300 EW0-300 EW0-300
NO.27 On an Extreme Networks switch, how many bits comprise an OSPF area ID?
A. 32 BITS
B. 48 BITS
C. 64 BITS
D. 128 BITS
Answer: A
certification Extreme Networks EW0-300 examen EW0-300 EW0-300
NO.28 How does an IGMP router learns about the existence of hosts in multicast groups:
A. By receiving a response on an IGMP membership query
B. By looking into the ARP cache
C. There is no dynamic learning process, instead static FDB entries are used
D. None of the above
Answer: A
Extreme Networks certification EW0-300 EW0-300 examen certification EW0-300 EW0-300 examen certification EW0-300
NO.29 Which of the following statements fit the description of PIM sparse mode? (choose
three that apply)
A. PIM sparse mode is suitable for network with minimal multicast deployment.
B. PIM sparse mode builds shared trees based on a common Rendez-Vous Point
C. In PIM sparse mode the RPF check depends on the tree type
D. An explicit join is not required in PIM sparse mode.
Answer: A,B,C,D
Extreme Networks EW0-300 EW0-300
NO.30 It is possible to set an STP-threshold to switch from a shared tree to a shortest path
tree. This switch over will be initiated by:
A. The Rendezvous Point
B. The Bootstrap Router
C. A last hop router
D. The router nearest to the source
Answer: C
Extreme Networks examen EW0-300 EW0-300 EW0-300
没有评论:
发表评论