Le Certificat de Cisco 642-457 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Cisco 642-457, c'est-à-dire avoir une grande fortune. Le Certificat Cisco 642-457 peut bien tester des connaissances professionnelles IT. La Q&A Cisco 642-457 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Cisco 642-457. Il n'y a pas de soucis à réussir le test avec une haute note.
L'équipe de Pass4Test rehcerche la Q&A de test certification Cisco 642-457 en visant le test Cisco 642-457. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Cisco 642-457 sans aucune doute.
Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Cisco 642-457, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Cisco 642-457. Vous aurez une space plus grande à se développer.
Code d'Examen: 642-457
Nom d'Examen: Cisco (Implementing Cisco Unified Communications Manager, Part 2 v8.0 (CIPT2 v8.0))
Questions et réponses: 130 Q&As
Vous n'avez besoin que de faire les exercices à propos du test Cisco 642-457 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.
642-457 Démo gratuit à télécharger: http://www.pass4test.fr/642-457.html
NO.1 Assume that the Cisco IOS SAF Forwarder is configured correctly. Which minimum configurations on
Cisco Unified Communications Manager are needed for the SAF registration to take place?
A.SAF Trunk, SAF Security Profile, SAF Forwarder, and CCD Advertising Service
B.SAF Trunk, SAF Security Profile, SAF Forwarder, and CCD Requesting Service
C.SAF Trunk, SAF Security Profile, SAF Forwarder, CCD Requesting Service, and CCD Advertising
Service
D.SAF Trunk, SAF Security Profile, and SAF Forwarder
E.SAF Trunk, CCD Requesting Service, and CCD Advertising Service
Answer: B
Cisco certification 642-457 certification 642-457 642-457 examen 642-457
NO.2 Refer to the exhibit.
Which trunks would be most suitable for Connection Y?
A.an H.225 trunk (gatekeeper-controlled)
B.intercluster trunk (gatekeeper-controlled)
C.a SIP trunk on the U.S. cluster and an intercluster trunk on the remote cluster
D.intercluster trunk (nongatekeeper-controlled)
E.No extra connections are required. As long as IP connectivity exists, you need only configure a route
pattern for each site. The Cisco Unified Communications Manager will automatically forward the calls over
the WAN if the destination directory number is not registered locally.
Answer: D
certification Cisco 642-457 examen 642-457 examen certification 642-457 certification 642-457
NO.3 Which two features require or may require configuring a SIP trunk? (Choose two.)
A.SIP gateway
B.Call Control Discovery between a Cisco Unified Communications Manager and Cisco Unified
Communications Manager Express
C.Cisco Device Mobility
D.Cisco Unified Mobility
E.registering a SIP phone
Answer: AB
Cisco 642-457 642-457 examen 642-457 certification 642-457
NO.4 Which process can localize a global E.164 with + prefix calling numbers for inbound calls to an IP phone
so that users see the calling number in a local format?
A.Calling number localization is done using translation patterns.
B.Calling number localization is done using route patterns.
C.Calling number localization is done by configuring a calling party transformation CSS at the phone.
D.Calling number localization is done by configuring a calling party transformation CSS at the gateway.
E.Calling number localization is done by configuring the phone directory number in a localized format.
Answer: C
Cisco 642-457 642-457 642-457 certification 642-457 642-457
NO.5 Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for
TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for
international calls to the U.S. To match the US-TEHO pattern \+!, how should the translation pattern be
configured?
A.9001.4085551234 with the Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +
B.9.0014085551234 with the Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +1
C.900.14085551234 with the Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +1
D.900.14085551234 with the Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +
E.001.4085551234 with the Called Party Transformation:
Prefix Digits Outgoing Calls: +
Answer: D
Cisco certification 642-457 642-457
NO.6 When an incoming PSTN call arrives at an MGCP gateway, how does the calling number get
normalized to a global E.164 number with the + prefix in Cisco Unified Communications Manager?
A.Normalization is done using translation patterns.
B.Normalization is done using route patterns.
C.Normalization is done using the gateway incoming called party prefixes based on number type.
D.Normalization is done using the gateway incoming calling party prefixes based on number type.
E.Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: D
Cisco examen 642-457 642-457 examen
NO.7 Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for
TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for
international calls to the U.S. What should the TEHO-US route list configuration consist of?
A.First route group should point only to the U.K. gateway. The second route group should point to the U.S.
gateway.
B.First route group should be only the local route group. The second route group should point to the U.S.
gateway.
C.First route group should point only to the U.S. gateway. The second route group should be the local
route group.
D.The TEHO-US route list should contain only the local route group. The globalized configuration means
that the appropriate gateway will be selected automatically.
E.The \+! route pattern should point directly to the U.S. gateway.
Answer: C
Cisco 642-457 642-457 642-457
NO.8 Refer to the exhibit.
Which configuration elements must match for adjacent neighbors to establish a SAF neighbor
relationship?
A. the label name specified in the router eigrp command
B. the autonomous-system number specified in the service-family ipv4 autonomous-system command
C. the sf-interface configuration
D. the topology base configurations
E. the label name specified in the router eigrp command and the autonomous-system number
Answer: B
certification Cisco 642-457 certification 642-457 642-457
NO.9 Which method can be used to address variable-length dial plans?
A.Overlap sending and receiving.
B.Add a prefix for all calls that are longer than 10-digits long
C.Use nested translation patterns to eliminate inter-digit timeout
D.Use the @macro on the route pattern
E.Use MGCP gateways, which support variable-length dial plans
Answer: A
certification Cisco 642-457 642-457
NO.10 Which statement about Service Advertisement Framework is true?
A.SAF requires that the EIGRP be configured on all routers, including non-SAF routers.
B.SAF requires that the EIGRP be configured only on SAF routers. Non-SAF routers act as an IP cloud.
C.SAF has no dependency on the underlying routing protocol, as long as it is a dynamic routing protocol.
Static routes are not supported.
D.SAF operates on any dynamic or static IP routing configuration. SAF is totally independent of the
underlying routing protocol.
Answer: D
Cisco 642-457 642-457 certification 642-457 certification 642-457
NO.11 A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323 gateway.
What should the gateway type be?
A.H.323 gateway
B.Cisco 3825
C.Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected.
D.The gateway can be added either as an H.323 gateway or Cisco 3800 series router.
E.The gateway can be added either as an H.323 gateway or Cisco 3825 series router.
Answer: A
Cisco examen 642-457 642-457 certification 642-457
NO.12 Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for
TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for
international calls to the U.S. Assuming the PSTN does not accept globalized numbers with + prefix. What
should the Called Party Transformation Pattern at the U.S. gateway be configured as?
A.\+.! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +
B.\+1.! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: None
C.\+408.! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: 1
D.\+1408.! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: None
E.\+1.408! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: None
Answer: D
Cisco 642-457 642-457 examen 642-457
NO.13 When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized
to an internal directory number in Cisco Unified Communications Manager?
A.Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway.
B.Normalization is done using route patterns.
C.Normalization is done using the gateway incoming called party prefixes based on number type.
D.Normalization is done using the gateway incoming calling party prefixes based on number type.
E.Normalization is achieved by local route group that is assigned to the MGCP gateway.
Answer: A
Cisco 642-457 certification 642-457 642-457 642-457
NO.14 Which statement best describes globalized call routing in Cisco Unified Communications Manager?
A.All incoming calling numbers on the phones are displayed as an E.164 with the + prefix.
B.Call routing is based on numbers represented as an E.164 with the + prefix format.
C.All called numbers sent out to the PSTN are in E.164 with the + prefix format.
D.The CSS of all phones contain partitions assigned to route patterns that are in global format.
E.All phone directory numbers are configured as an E.164 with the + prefix.
Answer: B
Cisco examen 642-457 examen 642-457 642-457
NO.15 Refer to the exhibit.
What should the destination IP address be configured as on the HQ and BR1 SIP trunks?
A.The HQ SIP trunk destination IP address should be 10.1.6.10. The BR1 SIP trunk destination IP
address should be 10.1.5.10.
B.The destination IP address is not configurable. Each cluster will learn about the remote trunk IP address
through SAF learned routes.
C.The destination IP address will be learned automatically and configured on the SIP trunks after the
Cisco Unified Communications Managers discover themselves.
D.The HQ SIP trunk destination IP address should be the HQ SAF Forwarder IP address. The BR1 SIP
trunk destination IP address should be the BR1 SAF Forwarder IP address.
Answer: B
Cisco examen certification 642-457 certification 642-457 642-457 642-457
Il y a plusieurs de façons pour réussir le test Cisco 642-457, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.
没有评论:
发表评论