Si vous vous inscriez le test Juniper JN0-343, vous devez choisir une bonne Q&A. Le test Juniper JN0-343 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
Vous aurez une assurance 100% à réussir le test Juniper JN0-343 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Juniper JN0-343 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Juniper JN0-343 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Juniper JN0-343.
Code d'Examen: JN0-343
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
Questions et réponses: 393 Q&As
Le test Juniper JN0-343 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.
Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.
Choisir le Pass4Test peut vous aider à réussir 100% le test Juniper JN0-343 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
JN0-343 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-343.html
NO.1 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
Juniper JN0-343 JN0-343 examen JN0-343 examen JN0-343
NO.2 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
Juniper examen certification JN0-343 certification JN0-343
NO.3 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
Juniper examen certification JN0-343 JN0-343 examen JN0-343
NO.4 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
Juniper JN0-343 examen certification JN0-343 certification JN0-343 JN0-343 examen
NO.5 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
Juniper examen JN0-343 examen JN0-343 examen JN0-343
NO.6 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
certification Juniper JN0-343 certification JN0-343 JN0-343 examen
NO.7 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
Juniper JN0-343 JN0-343 certification JN0-343
NO.8 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
certification Juniper JN0-343 examen JN0-343
NO.9 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper JN0-343 examen certification JN0-343
NO.10 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper JN0-343 JN0-343 examen certification JN0-343
NO.11 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
certification Juniper JN0-343 examen JN0-343 certification JN0-343 JN0-343 examen
NO.12 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
certification Juniper certification JN0-343 JN0-343 examen JN0-343 JN0-343 examen certification JN0-343
NO.13 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
Juniper examen JN0-343 certification JN0-343 JN0-343 JN0-343 JN0-343 examen
NO.14 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
Juniper examen certification JN0-343 JN0-343 certification JN0-343
NO.15 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper JN0-343 certification JN0-343 JN0-343
NO.16 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper JN0-343 JN0-343 certification JN0-343 JN0-343 examen JN0-343
NO.17 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
certification Juniper JN0-343 JN0-343 JN0-343
NO.18 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
Juniper JN0-343 examen certification JN0-343
NO.19 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
Juniper examen JN0-343 examen JN0-343 examen JN0-343 examen JN0-343
NO.20 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
Juniper certification JN0-343 JN0-343 JN0-343 examen
NO.21 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
Juniper JN0-343 certification JN0-343 JN0-343 examen certification JN0-343
NO.22 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper JN0-343 examen certification JN0-343 JN0-343 examen
NO.23 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
Juniper certification JN0-343 JN0-343 examen certification JN0-343
NO.24 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
certification Juniper certification JN0-343 JN0-343 certification JN0-343 certification JN0-343 certification JN0-343
NO.25 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
Juniper examen JN0-343 JN0-343
NO.26 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
Juniper JN0-343 certification JN0-343
NO.27 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper examen certification JN0-343 JN0-343 certification JN0-343 JN0-343
NO.28 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
Juniper examen JN0-343 examen JN0-343 examen certification JN0-343 JN0-343 examen certification JN0-343
NO.29 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
Juniper examen JN0-343 certification JN0-343 JN0-343 examen
NO.30 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
Juniper JN0-343 JN0-343 JN0-343 JN0-343
Le test Juniper JN0-343 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Juniper JN0-343 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.
没有评论:
发表评论