Choisissez le Pass4Test, choisissez le succès de test Microsoft 070-404. Bonne chance à vous.
Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Microsoft 070-521-VB est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.
Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Microsoft MB4-874. Le guide d'étude de Pass4Test comprend les excercices de Microsoft MB4-874 et la Q&A qui peut vous permetrre à réussir 100% le test Microsoft MB4-874. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Microsoft MB4-874 comme votre guide d'étude.
Code d'Examen: 070-404
Nom d'Examen: Microsoft (TS: System Center Service Manager 2010, Configuring (available in 2010))
Questions et réponses: 165 Q&As
Code d'Examen: 070-521-VB
Nom d'Examen: Microsoft (UPG:Trans MCPD.NET Frmwk 3.5 Dev Skil to .NET 4 Wndws App De)
Questions et réponses: 115 Q&As
Code d'Examen: MB4-874
Nom d'Examen: Microsoft (Microsoft Dynamics SL 2011 Installation and Configuration)
Questions et réponses: 75 Q&As
Si vous vous inscriez le test Microsoft MB4-874, vous devez choisir une bonne Q&A. Le test Microsoft MB4-874 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
L'importance de la position de Certificat Microsoft MB4-874 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Microsoft MB4-874 par votre première fois.
Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Microsoft 070-404, et aussi une meilleure assurance du succès du test 070-404. Vous choisissez Pass4Test, vous choisissez le succès.
070-521-VB Démo gratuit à télécharger: http://www.pass4test.fr/070-521-VB.html
NO.1 </serviceBehaviors>
NO.2 You are creating a Windows Communication Foundation (WCF) service based on WSHttpBinding.
New audit requirements dictate that callers must be authenticated on every call to ensure that their
credentials have not been revoked.
You need to ensure that the service will not cache the security request token.
What should you do?
A. Apply a ServiceBehavior attribute to the service implementation class with the InstanceContextMode
property set to Single.
B. In the message security configuration, change clientCredentialType from IssuedToken to UserName.
C. In the message security configuration, set establishSecurityContext to false.
D. At the end of every operation, call the SessionStateUtility.RaiseSessionEnd method.
Answer: C
Microsoft certification 070-521-VB 070-521-VB examen
NO.3 You are developing an application to update a user s social status. You need to consume the service
using Windows Communication Foundation (WCF).
The client configuration is as follows.
<system.serviceModel>
<bindings>
<webHttpBinding>
<binding name="SocialConfig">
<security mode="TransportCredentialOnly">
<transport clientCredentialType="Basic"
?realm="Social API" />
</security>
</binding>
</webHttpBinding>
</bindings>
<client>
<endpoint address="http://contoso.com"
binding="webHttpBinding"
bindingConfiguration="SocialConfig"
contract="ISocialStatus"
name="SocialClient" />
</client>
</system.serviceModel>
The service contract is defined as follows.
<ServiceContract()>
Public Interface ISocialStatus
<OperationContract()>
<WebInvoke(UriTemplate:="/statuses/update.xml?status={text}")>
Sub UpdateStatus(ByVal text As String)
End Interface
Which code segment should you use to update the social status?
A. Using factory As WebChannelFactory(Of ISocialStatus) =
New WebChannelFactory(Of ISocialStatus)("SocialClient")
factory.Credentials.UserName.UserName = user.Name
factory.Credentials.UserName.Password = user.Password
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
B. Using factory As ChannelFactory(Of ISocialStatus) =
New WebChannelFactory(Of ISocialStatus)(GetType(ISocialStatus))
factory.Credentials.UserName.UserName = user.Name
factory.Credentials.UserName.Password = user.Password
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
C. Using factory As ChannelFactory(Of ISocialStatus) =
New ChannelFactory(Of ISocialStatus)("POST")
factory.Credentials.Windows.ClientCredential.UserName =
user.Name
factory.Credentials.Windows.ClientCredential.SecurePassword.SetAt(
0, user.Password)
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
D. Using factory As WebChannelFactory(Of ISocialStatus) =
New WebChannelFactory(Of ISocialStatus)(GetType(ISocialClient))
factory.Credentials.Windows.ClientCredential.UserName =
user.Name
factory.Credentials.Windows.ClientCredential.SecurePassword.SetAt(
0, user.Password)
Dim socialChannel As ISocialStatus = factory.CreateChannel()
socialChannel.UpdateStatus(newStatus)
End Using
Answer: A
Microsoft 070-521-VB examen 070-521-VB 070-521-VB examen 070-521-VB
NO.4 You are developing a Windows Communication Foundation (WCF) service that reads messages from
a public non-transactional MSMQ queue. You need to configure the service to read messages from the
failed-delivery queue. Which URI should you specify in the endpoint configuration settings of the service?
A. net.msmq://localhost/msmq$;FailedMessages
B. net.msmq://localhost/msmq$;DeadLetter
C. net.msmq://localhost/system$;DeadXact
D. net.msmq://localhost/system$;DeadLetter
Answer: D
certification Microsoft 070-521-VB examen certification 070-521-VB 070-521-VB
NO.5 </behaviors>
You need to configure the service to publish the service metadata.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following XML segment between lines 10 and 11.
<endpoint address=""
binding="mexHttpBinding"
contract="IMetadataExchange"
/>
B. Add the following XML segment between lines 10 and 11.
<endpoint address=""
binding="basicHttpBinding"
contract="IMetadataExchange"
/>
C. Add the following XML segment between lines15 and 16.
<serviceDiscovery>
<announcementEndpoints>
<endpoint address=""/>
</announcementEndpoints>
</serviceDiscovery>
D. Add the following XML segment between lines 15 and 16
<serviceMetadata httpGetEnabled="true"/>
Answer: AD
certification Microsoft 070-521-VB certification 070-521-VB 070-521-VB examen
17. Four Windows Communication Foundation (WCF) services are hosted in Microsoft Internet
Information Services (IIS). No behavior configuration exists in the web.config file.
You need to configure the application so that every service and endpoint limits the number of concurrent
calls to 50 and the number of concurrent sessions to 25.
Which XML segment should you add to the system.serviceModel configuration section of the web.config
file?
A. <behaviors>
<serviceBehaviors>
<behavior name="*">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
B. <behaviors>
<serviceBehaviors>
<behavior name="default">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
C. <behaviors>
<serviceBehaviors>
<behavior name="">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
D. <behaviors>
<serviceBehaviors>
<behavior name="ALL">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
Answer: C
certification Microsoft 070-521-VB examen 070-521-VB examen
18. The endpoint of a Windows Communication Foundation (WCF) service uses basicHttpBinding for its
binding. Your company's policies have changed to require that messages not be sent in clear text.
You must ensure that all messages are encrypted when traveling across the network.
What should you do?
A. Set the ProtectionLevel property on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
B. Set the ProtectionLevel property on the service contract and update the bindingConfiguration attribute
in the endpoint element of the configuration file to webHttpBinding.
C. Set the PrincipalPermissionAttribute on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
D. Set the PrincipalPermissionAttribute on the service contract and update the bindingConfiguration
attribute in the endpoint element of the configuration file to wsHttpBinding.
Answer: A
certification Microsoft 070-521-VB examen certification 070-521-VB
NO.6 You are creating a Windows Communication Foundation (WCF) service to process orders. The data
contract for the order is defined as follows.
<DataContract()>
Public Class Order
<DataMember()>
Public Property CardHolderName As String
<DataMember()>
Public Property CreditCardNumber As String
End Class
You have the following requirements:
Enable the transmission of the contents of Order from the clients to the service.
Ensure that the contents of CreditCardNumber are not sent across the network in clear text.
Ensure that the contents of CreditCardNumber are accessible by the service to process the order.
You need to implement the service to meet these requirements.
What should you do?
A. Add a DataProtectionPermission attribute to the CreditCardNumber property and set the ProtectData
property to True.
B. Convert the DataContract to a MessageContract and set the ProtectionLevel property to
EncryptAndSign.
C. Change the data type of CreditCardNumber from String to SecureString.
D. Implement the CreditCardNumber property getter and setter. In the setter, run the value of the
CreditCardNumber through the MD5CryptoServiceProvider class TransformBlock method.
Answer: B
Microsoft certification 070-521-VB certification 070-521-VB certification 070-521-VB 070-521-VB
NO.7 A Windows Communication Foundation (WCF) service is responsible for transmitting XML documents
between systems. The service has the following requirements:
It must minimize the transmission size by attaching the XML document as is without using escape
characters or base64 encoding.
It must interoperate with systems that use SOAP but are not built on the .NET platform.
You need to configure the service to support these requirements.
Which message encoding should you use?
A. Binary message encoding
B. MTOM (Message Transmission Optimization Mechanism) message encoding
C. Text message encoding with message version set to none
D. Text message encoding with message version set to SOAP 1.2
Answer: B
certification Microsoft certification 070-521-VB certification 070-521-VB 070-521-VB examen
NO.8 You are creating a Windows Communication Foundation (WCF) service that is implemented as follows.
(Line numbers are included for reference only.)
01 <ServiceContract()>
02 <ServiceBehavior(IncludeExceptionDetailInFaults:=True)>
03 Public Class OrderService
04
05 <OperationContract()>
06 Public Sub SubmitOrder(ByVal anOrder As Order)
07
08 Try
09
10 Catch ex As DivideByZeroException
11
12 End Try
13 End Sub
14
15 End Class
You need to ensure that the stack trace details of the exception are not included in the error information
sent to the client.
What should you do?
A. Replace line 11 with the following line.
Throw
B. Replace line 11 with the following line.
Throw New FaultException(Of Order)(anOrder, ex.ToString())
C. After line 05, add the following line.
<FaultContract(GetType(FaultException(Of Order)))>
Replace line 11 with the following line.
Throw ex
D. After line 05, add the following line.
<FaultContract(GetType(FaultException(Of Order)))>
Replace line 11 with the following line.
Throw New FaultException(Of Order)(
anOrder, "Divide by zero exception")
Answer: D
certification Microsoft certification 070-521-VB certification 070-521-VB 070-521-VB examen 070-521-VB
没有评论:
发表评论