Pass4Test offre de HP HP2-T16 matériaux d'essai

Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test HP2-T16 est lequel très important dans les tests de Certification HP. Pour être qualifié de HP, on doit obtenir le passport de test HP HP2-T16.

Avec la version plus nouvelle de Q&A HP HP2-T16, réussir le test HP HP2-T16 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de HP après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.

Code d'Examen: HP2-T16

Nom d'Examen: HP (Industry Standard Architecture and Technology)

Questions et réponses: 123 Q&As

On doit faire un bon choix pour passer le test HP HP2-T16. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification HP HP2-T16 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Pass4Test peut offrir nombreux de documentations aux candidats de test HP HP2-T16, et aider les candidats à réussir le test. Les marétiaux visés au test HP HP2-T16 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test HP HP2-T16 100%.

Si vous êtes intéressé par l'outil formation HP HP2-T16 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

HP2-T16 Démo gratuit à télécharger: http://www.pass4test.fr/HP2-T16.html

NO.1 Which statements are true about AMD 2P or 4P system architecture? (Select three)
A. Requests for memory access are handle by the Northbridge ASIC.
B. Memory must be installed in banks corresponding to the installed processors.
C. Each processor has its own memory controller
D. The maximum amount of memory can be installed, regardless of the number of installed processors.
E. Requests for memory access are handle directly by the corresponding processor and relayed through
the HyperTransport link.
F. Communications between CPU and memory is handle through the QuickPath Interconnect.
Answer: BCE

HP   HP2-T16   HP2-T16 examen   HP2-T16   certification HP2-T16

NO.2 What must you check prior to adding another processor to an existing system? (Select Three)
A. amount of memory in the system
B. compatibility of the new processor with existing processors
C. firmware requirements for the new processor
D. number of users currently logged into the system
E. number of processors the operating system supports
F. weight of the new processor
Answer: BCE

certification HP   HP2-T16 examen   HP2-T16

NO.3 What does a system require to achieve PCI Hot Plug capability? (Select three)
A. hot-plug fans
B. hog-plug operating systems
C. hot-plug adapter drivers
D. hot-plug memory
E. hot-plug system tray
F. hot-plug platform
Answer: BCF

certification HP   HP2-T16   HP2-T16

NO.4 You are comparing similar versions of Intel Xeon and AMD Opteron processors. Which statements are
true about these processors? (Select two)
A. Opteron processors use a Northbridge that operates at core bus speed.
B. AMD Opteron processors are optimized for virtualization and AMD-V technology.
C. An Intel Xeon processor uses HyperTransport link to access its memory.
D. Intel Xeon processors are optimized for virtualization with Intel VT technology.
E. An AMD Opteron processors uses QuickPath Interconnect to access its memory.
Answer: BD

HP   HP2-T16   HP2-T16   HP2-T16   HP2-T16

NO.5 Your RAID 5 array on a Smart Array sustains a drive failure. A host spare replaces the failed drive
and rebuilds successfully. After replacing the failed drive with a new drive, what happens next?
A. The spare drive replicates its data to the new drive and both work as a mirror until you evict the spare
drive.
B. The new drive stays offline until you assign it to the array, at which point it automatically takes the place
of the spare drive.
C. The new drive re-assumes its place in the RAID set and after data rebuild is complete, the drive that
was the spare once again becomes a hot spare drive.
D. The new drive becomes a spare drive and you must go to the ACU to remove the old spare drive and
then re-add the new drive to the array.
Answer: C

certification HP   HP2-T16   HP2-T16 examen   HP2-T16 examen

NO.6 What can you do to optimize memory performance?
A. Enable Advanced Memory Buffer.
B. Rearrange existing memory to allow interleaving.
C. Implement memory caching
D. Configure processor interleaving.
Answer: B

HP examen   HP2-T16   HP2-T16 examen   certification HP2-T16

NO.7 Which major challenges of I/O virtualization do Virtual Machine Managers need to address? (Select
two)
A. WWN virtualization
B. DMA virtualization
C. IRQ virtualization
D. port virtualization
E. MAC virtualization
Answer: AE

HP   HP2-T16   certification HP2-T16   certification HP2-T16

NO.8 Why should server firmware be updated to the most recent version? (Select two)
A. to maintain a valid warranty
B. to fix problems from earlier versions
C. to support new features
D. to refresh changes that a user has edited in the existing firmware
E. to support leagcy features
Answer: BC

HP   certification HP2-T16   HP2-T16

NO.9 Which port type does a host server use when connected to an FC-SAN?
A. N_Port
B. E_Port
C. G_Port
D. F_Port
Answer: A

HP examen   HP2-T16   HP2-T16

NO.10 A customer is running a single-threaded application and experiences performance problems connected
with the processor subsystem. How would you solve this issue?
A. Change processor affinity to enable splitting single threads into multiple threads
B. Add additional processors
C. Upgrade the processor with a higher frequency processor.
D. Replace the processor with a higher stepping processor
E. Upgrade the processor with a multi-core processor.
F. Enable the integrated memory controller of the process at the BIOS.
Answer: C

HP examen   HP2-T16 examen   HP2-T16

NO.11 Into which range do reserved TCP/IP server ports generally fall?
A. 0-1023
B. 1-512
C. 21-80
D. 1024-8080
Answer: A

HP examen   HP2-T16   HP2-T16

NO.12 Which Network Operating System (NOS) security practices are commonly used when planning server
management? (Select three)
A. disable FTP and SSH
B. install hardware and software firewalls
C. disable unused TCP/IP service ports
D. use easy to remember password
E. enforce regular password changes
Answer: BCE

HP   certification HP2-T16   HP2-T16   certification HP2-T16   HP2-T16

NO.13 Which Network Operating System (NOS) filesystem allows you to set security on invididual files?
A. FAT32
B. FAT
C. NTFS
D. CDFS
Answer: C

certification HP   HP2-T16   HP2-T16   HP2-T16   HP2-T16

NO.14 Which server filters outgoing network requests?
A. FTP
B. Proxy
C. DNS
D. WINS
Answer: B

HP   certification HP2-T16   certification HP2-T16   HP2-T16

NO.15 What must you check prior to adding another processor to an existing system.? (Select Three)
A. amount of memory in the system
B. compatibility of the new processor with existing processors
C. firmware requirements for the new processor
D. number of users currently logged into the system
E. number of processors the operating system supports
F. weight of the new processor
Answer: BCE

HP   HP2-T16   HP2-T16

NO.16 What happens when you install a 66Mhz, 32-bit PCI card in a 33MHz, 64-bit PCI slot?
A. The 66MHz, 32-bit card operates at 33MHz in 64-bit mode.
B. The 66MHz, 32-bit card operates at 66MHz in 32-bit mode.
C. All 33MHz, 64-bit cards on the PCI bus operate like 33MHz, 32-bit cards.
D. The 66MHz card operates at 33MHz.
Answer: D

certification HP   HP2-T16   HP2-T16 examen   HP2-T16   certification HP2-T16

NO.17 What is the virtual machine instance commonly called?
A. guest
B. host
C. partition
D. hypervisor
Answer: A

HP   certification HP2-T16   HP2-T16   certification HP2-T16   HP2-T16 examen

NO.18 Which command can be used to verify connectivity to a client machine?
A. ping
B. nslookup
C. nbstat
D. ipconfig
Answer: A

HP   HP2-T16 examen   certification HP2-T16   certification HP2-T16

NO.19 How does single-mode fiber compare with multimode fiber?
A. Single mode fiber has a higher bandwidth and lower loss.
B. Multimode fiber has a higher bandwidth and lower loss.
C. Multimode fiber is more often used for long-distance telecommunications.
D. Single-mode fiber has higher loss and lower bandwidth.
Answer: A

HP   HP2-T16 examen   HP2-T16

NO.20 Which technology should you implement for disk redundancy?
A. SATA
B. NTFS
C. RAID
D. SCSI
Answer: C

certification HP   HP2-T16   HP2-T16   HP2-T16   certification HP2-T16

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test HP HP2-T16 juste avec la Q&A de HP HP2-T16 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.